Inductive sensor NJ2-11-SN
- 2 mm flush
- Usable up to SIL 3 acc. to IEC 61508
- Degree of protection IP68
- ATEX-/IECEx-approvals for zone 0/1/20/21 (Ex i)
- ATEX-/IECEx-approvals for zone 2/22 (Ex ec/tc)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of NJ2-11-SN
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR with safety function | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Assured operating distance | 0 ... 1.62 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Safety Integrity Level (SIL) | up to SIL3 acc. to IEC 61508 Danger! In safety-related applications the sensor must be operated with a qualified fail safe interface from Pepperl+Fuchs, such as KFD2-SH-EX1. Consider the "exida Functional Safety Assessment" document which is available on www.pepperl-fuchs.com as an integral part of this product's documentation. |
|
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 ... 3000 Hz | |
| Suitable for 2:1 technology | yes , with reverse polarity protection diode | |
| Current consumption | ||
| Measuring plate not detected | ≥ 3 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| MTTFd | 10660 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
|
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Ga | IECEx PTB 11.0092X | |
| Equipment protection level Gb | IECEx PTB 11.0092X | |
| Equipment protection level Gc (ec) | IECEx TUR 21.0017X | |
| Equipment protection level Da | IECEx PTB 11.0092X | |
| Equipment protection level Dc (tc) | IECEx TUR 21.0018X | |
| Equipment protection level Mb | IECEx PTB 11.0092X | |
| ATEX approval | ||
| Equipment protection level Ga | PTB 00 ATEX 2049 X | |
| Equipment protection level Gb | PTB 00 ATEX 2049 X | |
| Equipment protection level Gc (ec) | TÜV 20 ATEX 8523 X | |
| Equipment protection level Da | PTB 00 ATEX 2049 X | |
| Equipment protection level Dc (tc) | TÜV 20 ATEX 8524 X | |
| UL approval | cULus Listed, General Purpose | |
| Ordinary Location | E87056 | |
| Hazardous Location | E501628 | |
| Control drawing | 116-0454 | |
| CCC approval | ||
| Hazardous Location | 2020322315002308 | |
| NEPSI approval | ||
| NEPSI certificate | GYJ16.1392X | |
| TIIS approval | on request | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical specifications | ||
| Connection type | cable | |
| Housing material | Valox (PBT) , black | |
| Sensing face | Valox (PBT) , black | |
| Degree of protection | IP68 | |
| Cable | ||
| Cable diameter | 4.8 mm ± 0.2 mm | |
| Bending radius | > 10 x cable diameter | |
| Material | silicone | |
| Core cross section | 0.34 mm2 | |
| Length | 2 m | |
| Dimensions | ||
| Length | 31 mm | |
| Diameter | 11 mm | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274101 |
| ECLASS 12.0 | 27274101 |
| ECLASS 11.0 | 27272401 |
| ECLASS 10.0.1 | 27272401 |
| ECLASS 9.0 | 27272401 |
| ECLASS 8.0 | 27272401 |
| ECLASS 5.1 | 27272401 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NJ2-11-SN
Datasheet: NJ2-11-SN
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet NJ2-11-SN | 506 KB | |
| Datasheet NJ2-11-SN | 483 KB | |
| Fiche de données NJ2-11-SN | 488 KB | |
| Datenblatt NJ2-11-SN | 483 KB | |
| Scheda tecnica NJ2-11-SN | 489 KB | |
| Datasheet NJ2-11-SN | 535 KB | |
| Folha de dados NJ2-11-SN | 487 KB | |
| Hoja de datos NJ2-11-SN | 490 KB | |
| Datasheet NJ2-11-SN | 493 KB |
Documents: NJ2-11-SN
| Instruction manuals | File Type | File Size |
|---|---|---|
| Инструкции | 206 KB | |
| Návod k poużití | 196 KB | |
| Instruktions manual | 195 KB | |
| Instruction manual | 196 KB | |
| Kasutusjuhend | 188 KB | |
| Käyttöohje | 188 KB | |
| Manuel d'instructions | 202 KB | |
| Betriebsanleitung | 196 KB | |
| Οδηγίες χρήσης | 210 KB | |
| Handleiding | 197 KB | |
| Instruction manual / Betriebsanleitung | 194 KB | |
| Használati útmutató | 200 KB | |
| Manuale di istruzioni | 199 KB | |
| Lietošanas pamācība | 195 KB | |
| Instrukciju vadovas | 196 KB | |
| Instrukcja obsługi | 259 KB | |
| Manual de instruções | 200 KB | |
| Manual de utilizare | 200 KB | |
| Návod na poużitie | 197 KB | |
| Navodila za uporabo | 194 KB | |
| Manual de instrucciones | 201 KB | |
| Manual | 193 KB |
CAD+CAE: NJ2-11-SN
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 39 KB |
| CAD Portal / CAD Portal | LINK | --- |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 57 KB |
Approvals+Certificates: NJ2-11-SN
| Certificates | File Type | File Size |
|---|---|---|
| Canada USA UL Hazardous Location | 412 KB | |
| Canada USA UL Ordinary Location | 1806 KB | |
| China SITIIAS CCC Ex Certificate | 2727 KB | |
| EU PTB ATEX ia 2G, 1G, 1D s. certificate | 9560 KB | |
| Europe TUV Rheinland ATEX ec 3G | 678 KB | |
| Europe TUV Rheinland ATEX tc 3D | 862 KB | |
| JP TIIS Ex ia | 1839 KB | |
| United Kingdom CML UKEX Category I M2 UKEX Category II 2 G UKEX Category II 1 D UKEX Category II 1 G | 331 KB | |
| Worldwide PTB IECEx ia | LINK | --- |
| Worldwide TUV Rheinland IECEx ec | LINK | --- |
| Worldwide TUV Rheinland IECEx tc | LINK | --- |
| exida Functional Safety Assessment | 302 KB | |
| Control Drawings | ||
| Control drawing UL / Control drawing UL | 206 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 1339 KB | |
| UK Declaration of Conformity (P+F) | 1323 KB |
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.