[Change Country]   Australia
You must have cookies enabled to get the best browsing experience on our website.
Learn how to enable cookies.



BB10 Series Plug-In Thru-Beam Sensors for Doors and Turnstiles

Sensors as small as a button but as effective as larger sensors

BB10 series thru-beam sensors - small and easy to install
BB10 series thru-beam sensors - small and easy to install
There is no easier way to install a photoelectric sensor: Drill hole (13 mm) – snap in sensor – done.

With a remarkably large maximum sensing range of 8 m the BB10 miniature photoelectric sensors can match large photoelectric sensors in every respect. This applies in particular to the conditions in which the sensors operate.

An extended working range for temperatures between-40 °C and  60 °C makes the BB10 suitable for extremely cold regions and locations where the temperature fluctuates drastically. The housing is completely encapsulated according to IP67 and the special design prevents fractures at the cable exit.

The BB10 thru-beam sensor is suitable for a multi-beam sensor installation. A lens with a narrow transmitter opening angle of 3° was developed specially. In addition, two frequencies F1 and F2 to avoid cross-talk. A clearly visible display enables simpler alignment by assessing signal stability.

The new plug-in button photoelectric sensorsfrom the BB10 series are also extremely affordable sensors that sacrifice nothing by way of performance.


Applications:

  • Doors
  • Turnstiles
  • Elevators
  • Escalators

Main features of the BB10 series:

  • Plug-in housing for 13 mm hole
  • Design provides long-term stability with sealed rear panel, no casting compound (susceptible to temperature and moisture)
  • Integral circuit with no external control interface unit
  • Infrared light 880 nm
  • Ranges: 8 m and 4 m
  • Improved setup and maintenance due to the display of the switching state and excess gain FR2
  • Sealed, watertight IP67 housing
  • Suitable for extremely cold regions and locations where the temperature fluctuates between–40 °C and 60 °C
  • Two frequencies F1 and F2 to avoid cross-talk
  • Flexible mounting options

Serviceline Information

Products



Drill hole, snap in sensor, and you’re done. The new BB10 miniature plug-in photoelectric sensors are so easy to install. With a maximum sensing range of 8 m, the small thru-beam sensors can match large photoelectric sensors in every respect.